How many #1/0 THHN fit in 1-1/4" Liquidtight?
31/0 AWG THHN/THWN-2 wires in 1-1/4" Liquidtight flexible metal conduit (LFMC)
1.528 sq in × 40 % = 0.6112 sq in allowed. ÷ 0.1855 sq in per wire = 3.29, so 3.
This pull in numbers
- 3 wires fill
- 36.4 % of 1-1/4" Liquidtight
- Limit for three or more
- 40 %
- For 4 or more
- 1-1/2" Liquidtight, up to 4
- Pipe to wire diameter
- 2.87 to 1
- In THW insulation
- 2 fit
- In XHHW-2 insulation
- 3 fit
The pipe is 2.87 times the wire's diameter, inside the 2.8 to 3.2 range where three wires can wedge side by side on a pull. If you pull exactly three, go up a size or pull with care.
Before you pull 3
- The ground counts. Every wire in the pipe counts toward fill, the green or bare ground and the neutrals too. 3 is the total, not the hots.
- Bends. A full pipe pulls hard. Keep to 360° of bends between pull points, less for a tight fill.
#1/0 THHN in other 1-1/4" conduit
| Conduit | Inside area | Most #1/0 THHN |
|---|---|---|
| Electrical metallic tubing | 1.496 | 3 |
| Intermediate metal conduit | 1.647 | 3 |
| Rigid metal conduit (RMC, GRC) | 1.526 | 3 |
| Rigid PVC conduit, Schedule 40 | 1.453 | 3 |
| Rigid PVC conduit, Schedule 80 | 1.237 | 2 |
| Flexible metal conduit (FMC, Greenfield) | 1.277 | 2 |
| Liquidtight flexible metal conduit (LFMC) | 1.528 | 3 |
| Electrical nonmetallic tubing (smurf tube) | 1.453 | 3 |
#1/0 THHN in other Liquidtight sizes
Other wire sizes in 1-1/4" Liquidtight
#14: 63#12: 46#10: 29#8: 16#6: 12#4: 7#3: 6#2: 5#1: 4#1/0: 3#2/0: 2#3/0: 1#4/0: 1250 kcmil: 1300 kcmil: 1350 kcmil: 1500 kcmil: 1