How many #1/0 THHN fit in 3/4" Rigid?
11/0 AWG THHN/THWN-2 wires in 3/4" Rigid metal conduit (RMC, GRC)
0.549 sq in × 53 % = 0.2910 sq in allowed. ÷ 0.1855 sq in per wire = 1.57.
This pull in numbers
- 1 wires fill
- 33.8 % of 3/4" Rigid
- Limit for one
- 53 %
- For 2 or more
- 1-1/4" Rigid, up to 3
- Pipe to wire diameter
- 1.72 to 1
- In THW insulation
- 1 fit
- In XHHW-2 insulation
- 1 fit
Before you pull 1
- The ground counts. Every wire in the pipe counts toward fill, the green or bare ground and the neutrals too. 1 is the total, not the hots.
- Bends. A full pipe pulls hard. Keep to 360° of bends between pull points, less for a tight fill.
#1/0 THHN in other 3/4" conduit
| Conduit | Inside area | Most #1/0 THHN |
|---|---|---|
| Electrical metallic tubing | 0.533 | 1 |
| Intermediate metal conduit | 0.586 | 1 |
| Rigid metal conduit (RMC, GRC) | 0.549 | 1 |
| Rigid PVC conduit, Schedule 40 | 0.508 | 1 |
| Rigid PVC conduit, Schedule 80 | 0.409 | 1 |
| Flexible metal conduit (FMC, Greenfield) | 0.533 | 1 |
| Liquidtight flexible metal conduit (LFMC) | 0.541 | 1 |
| Electrical nonmetallic tubing (smurf tube) | 0.508 | 1 |