How many #1/0 THHN fit in 6" Rigid?
631/0 AWG THHN/THWN-2 wires in 6" Rigid metal conduit (RMC, GRC)
29.158 sq in × 40 % = 11.6632 sq in allowed. ÷ 0.1855 sq in per wire = 62.87, which Note 7 rounds up to 63 because the decimal is 0.8 or more.
This pull in numbers
- 63 wires fill
- 40.1 % of 6" Rigid
- Limit for three or more
- 40 %
- For 64 or more
- no bigger Rigid
- Pipe to wire diameter
- 12.54 to 1
- In THW insulation
- 52 fit
- In XHHW-2 insulation
- 64 fit
Before you pull 63
- The ground counts. Every wire in the pipe counts toward fill, the green or bare ground and the neutrals too. 63 is the total, not the hots.
- Derating. If all 63 were current-carrying, each would be adjusted to 35 % of its ampacity (Table 310.15(C)(1)): a #1/0 THHN at 170 A in the 90 °C column becomes 59.5 A. Grounds don't count as current-carrying. How derating works
- Bends. A full pipe pulls hard. Keep to 360° of bends between pull points, less for a tight fill.
#1/0 THHN in other 6" conduit
| Conduit | Inside area | Most #1/0 THHN |
|---|---|---|
| Rigid metal conduit (RMC, GRC) | 29.158 | 63 |
| Rigid PVC conduit, Schedule 40 | 28.567 | 61 |
| Rigid PVC conduit, Schedule 80 | 25.598 | 55 |
#1/0 THHN in other Rigid sizes
Other wire sizes in 6" Rigid
#4: 141#3: 120#2: 100#1: 74#1/0: 63#2/0: 52#3/0: 43#4/0: 36250 kcmil: 29300 kcmil: 25350 kcmil: 22500 kcmil: 16