How many #4/0 THHN fit in 1-1/2" PVC Sch 80?
14/0 AWG THHN/THWN-2 wires in 1-1/2" Rigid PVC conduit, Schedule 80
1.711 sq in × 53 % = 0.9068 sq in allowed. ÷ 0.3237 sq in per wire = 2.80.
This pull in numbers
- 1 wires fill
- 18.9 % of 1-1/2" PVC Sch 80
- Limit for one
- 53 %
- For 2 or more
- 2" PVC Sch 80, up to 3
- Pipe to wire diameter
- 2.30 to 1
- In THW insulation
- 1 fit
- In XHHW-2 insulation
- 1 fit
Before you pull 1
- The ground counts. Every wire in the pipe counts toward fill, the green or bare ground and the neutrals too. 1 is the total, not the hots.
- Bends. A full pipe pulls hard. Keep to 360° of bends between pull points, less for a tight fill.
#4/0 THHN in other 1-1/2" conduit
| Conduit | Inside area | Most #4/0 THHN |
|---|---|---|
| Electrical metallic tubing | 2.036 | 1 |
| Intermediate metal conduit | 2.225 | 2 |
| Rigid metal conduit (RMC, GRC) | 2.071 | 1 |
| Rigid PVC conduit, Schedule 40 | 1.986 | 1 |
| Rigid PVC conduit, Schedule 80 | 1.711 | 1 |
| Flexible metal conduit (FMC, Greenfield) | 1.858 | 1 |
| Liquidtight flexible metal conduit (LFMC) | 1.981 | 1 |
| Electrical nonmetallic tubing (smurf tube) | 1.986 | 1 |
#4/0 THHN in other PVC Sch 80 sizes
Other wire sizes in 1-1/2" PVC Sch 80
#14: 70#12: 51#10: 32#8: 18#6: 13#4: 8#3: 7#2: 6#1: 4#1/0: 3#2/0: 3#3/0: 1#4/0: 1250 kcmil: 1300 kcmil: 1350 kcmil: 1500 kcmil: 1